Front Seat

FRONT SEAT

REMOVAL

1. Move seat to forward position.
2. Remove bolts attaching rear of seat track to floor.
3. Move seat to rearward position.

Fig. 1:

4. Remove bolts attaching front of seat track to floor crossmember (Fig. 1).
5. Remove seat from vehicle.

INSTALLATION

1. Move seat to mid-position and verify that both seat tracks are locked into same position with eight teeth behind the latch mechanism.
2. Move seat into position in vehicle. Do not use the head restraint, side shield, recliner handle, or the adjuster lift bar to move the seat.
3. Ensure that the locating tabs on the front mounting feet are installed through the slits in the carpet and into the openings in the floor pan crossmember.
4. Install and tighten front inboard bolt attaching seat track to floor crossmember.
5. Install front outboard bolt attaching seat track to floor crossmember. Tighten front seat bolt to 55 N.m (40 ft.lbs.) torque.
6. Install rear seat track attaching bolts to floor. Tighten rear seat bolts outboard first then inboard to 55 N.m (40 ft.lbs.) torque.