Procedures

GLASS PANEL REMOVAL

Fig. 1 Sunroof Components:

1. Position sunroof sunshade in full rearward position.
2. Position the glass reinforcement panel in the CLOSED position before removing the six mounting screws.
3. Remove sunroof glass panel six screws.
4. Push glass panel upward from underside until glass panel clears the roof panel.
5. Lift glass panel from vehicle.



INSTALLATION
1. Position glass reinforcement panel in roof opening.
2. Start, but do not tighten, glass attachment screws. Ensure glass is in the CLOSED position.
3. Cycle sunroof glass panel to the close position. Using a business card as a guide, slide card around the edge of glass panel to ensure panel is centered in opening.
4. With the aid of a helper, hold the glass panel in position and tighten glass attaching screws.
5. Ensure glass adjustment, refer to Glass Adjustment procedure.