Sun Shade: Service and Repair

REMOVAL
1. Open sunroof glass panel to the vent position.

Fig. 1 Sunroof Components:

2. Through the glass panel opening, disengage the two rear slide blocks of sunshade from sunshade guide.
3. Slide the sunshade rearward to have access to the two front slide blocks of sunshade and disengage sunshade from sunshade guide.
4. Lift sunshade out of sunshade guide.

INSTALLATION
1. Place sunshade with cloth side down and install one side's slide blocks into the track on the sunshade guide.
2. Slide the other side's slide blocks to fully inward position and insert them into the sunshade guide.
3. Verify that all four slide blocks are fully engaged in the sunshade guide.
4. Slide sunshade fully rearward and forward to verify operation.