Rear Shelf: Service and Repair

REAR SHELF TRIM PANEL

REMOVAL

1. Remove quarter trim panels as necessary. Refer to Trim Panel.
2. Remove rear seat cushion and back.
3. Disengage seat belt bezels from rear shelf trim panel.
4. Remove rear seat shoulder belt from the shelf by sliding belt through the slot.

Fig. 9:

5. Remove rear shelf trim panel from vehicle (Fig. 9).

INSTALLATION

1. Place into position rear shelf trim panel.
2. Slide the rear seat shoulder belt through the slot in the rear shelf trim panel.
3. Engage seat belt bezels to rear shelf trim panel.
4. Install rear seat cushion and back.
5. Install quarter trim.