Keyless Entry Transmitter: Description and Operation

The transmitter has four buttons for operation. They are LOCK, UNLOCK, DECK LID RELEASE, and PANIC.
- The UNLOCK button will unlock the driver door and enable illuminated entry. Pushing and releasing the button once will unlock the driver door. Pushing and releasing the button two times within a five second period will unlock all doors (double unlock activation enabled).
- Upon pressing the LOCK button, the horn will sound a short chirp (if enabled) and flash the park lamps to notify that the all door lock signal was received and acted upon. Illuminated entry is cancelled and the interior lamps are faded to off.
- Pushing and releasing the DECK LID RELEASE button twice within a five second period will actuate the decklid release solenoid, causing the deck lid to be slightly ajar. If so desired, the decklid may be set to release after one button push by the dealer. For procedures on programming with the DRB III(R) scan tool, refer to the proper Body Diagnostic Procedures.
- Pushing the PANIC button will cause the panic alarm to sound for three minutes, until the panic button is pressed a second time, or until the vehicle reaches a speed of 15 mph.