Instrument Panel Top Cover

REMOVAL
1. Using a trim stick (special tool #C-4755), pry out the left and right a-pillar moldings, slide rearward and remove.
2. Using a trim stick, pry out the left and right a-pillar moldings, slip each end of the top cover disengaging clips.
3. Lift rear edge of the upper/top cover using a trim stick along the rear edge of the upper/top cover.
4. Slide upper/top cover rearward to disengaging the eight clips.
5. Remove the upper/top cover from vehicle.

INSTALLATION
For installation, reverse the above procedures.