Front Door Handle: Service and Repair

REMOVAL
1. Remove the four screws at bottom of glove box door.
2. Open the glove box door and slide sidewalls inboard to remove the door/box assembly from instrument panel.
3. Place the glove box on a cloth to protect the door surface.
4. Remove the nine screws from backside of the door.
5. Separate the inner and outer door.
6. Remove one screw to the handle and latch.
7. Remove handle and latch from outer door.

NOTE: If the glove box door is going to be left oft for an extended period of time, the Ignition Off Draw (IOD) fuse should be pulled to maintain battery condition.

INSTALLATION
For installation, reverse the above procedures.