CD Changer: Service and Repair

REMOVAL
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Remove ash receiver (if applicable).
3. Using a trim stick (special tool # C-4755), gently pry out on center trim bezel. Disconnect wiring connectors to HVAC controls, cigar lighter/auxiliary power outlet and traction control switch.
4. Remove instrument panel center trim bezel.
5. Remove two retaining screws to in-dash CD changer.
6. Pull CD changer out of instrument panel, disconnect wiring and remove from vehicle.

INSTALLATION
For installation, reverse the above procedures