ORC Loss of Ignition Run/Start (Stored)

Test 1:

SYMPTOM
ORC, LOSS OF IGNITION RUN/START (STORED)

TEST NOTE
This symptom is diagnosed using the test ORC, CALIBRATION MISMATCH (STORED).

WHEN MONITORED
With the ignition in the run/start position the ORC monitors the Fused Ignition Switch Output Run/Start circuit for proper system voltage.

SET CONDITION
If the voltage on the Fused Ignition Switch Output Run/Start circuit drops below 4.5 volts, the code will set.

POSSIBLE CAUSES
- Stored code present
- Stored code has become active