Windshield Washer Hose: Service and Repair

REMOVAL
1. Remove left headlamp module. Refer to Lamps for Removal and Installation procedures.
2. Remove underhood silencer pad clips only along left rear of hood.
3. Carefully pull silencer pad away from hood.
4. Disconnect "Y" connector from hood.
5. Disconnect right and left hood nozzle hoses at "Y" connector.
6. Disconnect hose clips from hood, tower to tower beam, and fender beam.
7. Disconnect washer hose from top of reservoir and from washer pump discharge port.
8. Carefully pull washer hose up through engine compartment.

INSTALLATION
For installation, reverse the above procedures. Be sure to test and check system for leaks and pinched or kinked hoses.