Rear Door Trim Panel - Loose At Upper Rear Corners: Overview
NUMBER: 23-29-00GROUP: Body
DATE: July 7, 2000
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 23-05-99, DATED February 12, 1999 WHICH SHOULD BE REMOVED FROM YOUR FILES AND NOTED IN THE 1999 TECHNICAL SERVICE BULLETIN MANUAL (PUBLICATION NO. 81-699-00004). ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE ADDITIONAL MODELS.
SUBJECT:
Rear Door Trim Panel Loose At Upper Rear Corner
OVERVIEW:
This bulletin involves installing a screw securing the door trim panel and adding flocking tape to the interface between the rear of the door panel and sheet metal on **some** Concorde/LHS/300M vehicles.
MODELS:
1998 - **2001** (LH) Concorde/Intrepid/LHS/300M
SYMPTOM/CONDITION:
Rear door trim panel may be loose (pulled away from inner sheet metal) at the top rear corner. Condition may be aggravated by slamming the door shut.
DIAGNOSIS:
If door trim panel is installed properly (all fasteners secure) but can be pulled loose at the upper rear corner or loosens when the door is slammed, perform the Repair Procedure.
PARTS REQUIRED:
1 06032723 Screw, Door Panel Attaching
2 06504014 Clip, Door Panel Attaching, White, **1998 -2000 Model Years**
1 06503204 Clip, Door Panel Attaching, Green, **1998 -2000 Model Years**
1 04773968 Tape, Flocking
**NOTE:
2001 MODEL YEAR DOOR PANEL ATTACHING CLIPS ARE REUSABLE.**
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No: 23-20-22-96/97 Repair Door Trim Panel 0.4 Hrs.
Right or Left Without
Existing Anti-Squeak Tape
23-20-22-98/99 Repair Door Trim Panel 0.2 Hrs.
Right or Left With
Existing Anti-Squeak Tape
FAILURE CODE: XX - Service Adjustment
�y9:
Disclaimer