For Canada Vehicles

Conditions for switch-ON of headlight relay




Low-beam operation
- The headlight relay is switched ON when the lighting switch is set to the "HEAD" position.
- In this state, place the dimmer/passing switch in the "LO" position to turn on the low-beam headlights.

High-beam operation
- The headlight relay is switch ON when the lighting switch is set to the "HEAD" position.
- In this state, place the dimmer/passing switch in the "HI" position, and the high-beam relay will be closed and the headlights will be on high beam.

High-beam indicator light
- This indicator illuminates during use of the high beam of the headlights, and also when the passing signal (high beam) is activated.

Passing operation
- When the dimmer/passing switch is set to the "ON" position, the headlight relay is switched ON and the high beam of the headlight illuminates