DRB III Does Not Power Up (Blank Screen)

DRB III DOES NOT POWER UP (BLANK SCREEN)
If the LED's do not light or no sound is emitted at start up, check for loose cable connection or a bad cable. Check the vehicle battery voltage (data link connector cavity 16). A minimum of 11 Volts is required to adequately power the DRB III.

If all connections are proper between the DRB III and the vehicle or other devices, and the vehicle battery is fully charged, an inoperative DRB III may be the result of faulty cable or vehicle wiring.

Perform THE BLANK SCREEN TEST UNDER COMMUNICATION.