Wiper Motor Assembly Mounting Grommet Replacement

REMOVAL
1. Remove wiper arms and blades.
2. Remove the cowl screen.
3. Remove wiper motor assembly.
4. Remove the four grommets.

INSTALLATION
For installation reverse the above procedures. Ensure proper position of grommets when installing:
1. The right inboard grommet is installed with insert flat facing down. The remaining grommets installed with insert flat facing up.
2. The left outboard grommet has a small eyelet.
3. The right inboard grommet threaded eyelet.
4. The two center grommets have a large eyelets