Lighted Transmission Range Indicator Letter Bezel

REMOVAL
1. Remove floor console.
2. Disconnect the wire harness connector on bottom-side of floor console.
3. Disconnect the inverter for lighted Transmission Range Indicator letter bezel from shifter cover.
4. Pull bezel downward through access hole in floor console.
5. Remove lighted transmission range indicator letter bezel from vehicle.

INSTALLATION
1. Position lighted transmission range indicator letter bezel to vehicle.
2. Push bezel upward through access hole in floor console.
3. Connect inverter for lighted transmission range indicator letter bezel to shifter cover.
4. Connect the wire harness connector on bottom-side of floor console.
5. Install floor console.