Wiper System

WIPER SYSTEM
The wiper system provides the driver with normal wipe (low and high speeds), intermittent wipe, wipe after wash and mist wipe functions. The driver selects the wiper function via a resistive multiplexed stalk switch mounted on the steering column.

Other wiper system features:

Speed Sensitive Intermittent Wipe Mode - There are six individual delay times with a minimum delay of 1/2 second to a maximum of 18 seconds. When the vehicle speed is under 10 MPH, the delay time is doubled providing a range from one second to 36 seconds.

Mist Wipe - When the wiper is off and the driver presses the mist control for more than 125 millisecond, one wipe cycle in low speed mode will be provided. The wipe will continue in low speed as long as the switch is held in that position.

Wiper After Wash Mode - When the driver presses the wash button for over 3/8 second and then releases it, the wiper will continue to run for two additional wipe cycles.