FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Knock Sensor: Testing and Inspection

The engine knock sensor is affected by a number of factors. A few of these are: ignition timing, cylinder pressure, fuel octane, etc. The knock sensor generates an AC voltage whose amplitude increases with the increase of engine knock. The knock sensor can be tested with a digital voltmeter. The RMS voltage starts at about 20mVac (at about 700 rpm) and increases to approximately 600 mVac (5000 rpm). If the output falls outside of this range a DTC will be set.