General

Under normal operation, the DRBIII will display one of only two error messages:
- User - Requested WARM Boot or User - Requested COLD Boot

If the DRBIII should display any other error message, record the entire display and call the scantool manufacturer for information and assistance. This is a sample of such an error message display:

ver: 2.14
date: 26 Jul93
file: key_itf.cc
date: Jul 26 1993
line: 548
err: Ox1
User-Requested COLD Boot

Press MORE to switch between this display and the application screen.
Press F4 when done noting information.