Camshaft Position Sensor: Description and Operation

CAMSHAFT POSITION SENSOR-PCM INPUT

Camshaft Position Sensor-2.4L:

The camshaft position sensor attaches to the rear of the cylinder head.
The sensor also acts as a thrust plate to control camshaft end play.

The PCM determines fuel injection synchronization and cylinder identification from inputs provided by the camshaft position sensor and crankshaft position sensor. From the two inputs, the PCM determines crankshaft position.

Refer to the Camshaft Position Sensor for more information.

CAMSHAFT POSITION SENSOR

Target Magnet - Typical:

The camshaft position sensor attaches to the rear of the cylinder head. A target magnet attaches to the rear of the camshaft and indexes to the correct position. The sensor also acts as a thrust plate to control camshaft endplay.

Camshaft Position Sensor - 2.4L DOHC:

The PCM determines fuel injection synchronization and cylinder identification from inputs provided by the camshaft position sensor and crankshaft position sensor. From the two inputs, the PCM determines crankshaft position.

Target Magnet Polarity:

The target magnet has four different poles arranged in an asymmetrical pattern. As the target magnet rotates, the camshaft position sensor senses the change in polarity. The sensor input switches from high (5 volts) to low (0.30 volts) as the target magnet rotates. When the north pole of the target magnet passes under the sensor; the output switches high. The sensor output switches low when the south pole of the target magnet passes underneath.