Tachometer: Service and Repair

The Instrument Cluster must be removed to service the cluster printed circuit board. Refer to Instrument Cluster Replacement.


REMOVAL

Mask/Lens Retaining Screws:

1. Remove mask/lens retaining screws and remove mask/lens.

Back Cover Retaining Screws:

2. Disconnect odometer/transmission range indicator connector from the printed circuit board.

Speedometer/Tachometer:

3. Remove screws attaching speedometer/tachometer to housing and remove.

Odometer/Transmission:

4. Remove screws attaching from the back of speedometer and remove the odometer/transmission range indicator display.

INSTALLATION
For installation, reverse the above procedures.