Rocker Arm Replacement

REMOVAL
1. Remove cylinder head cover using.
2. Remove timing belt, sprockets and covers using.
3. Remove camshaft.

CAUTION: If cam follower assemblies are to be reused, always mark position for reassembly in their original positions.

4. Remove cam follower assemblies from cylinder

INSPECTION

Figure 39:

Inspect the cam follower assembly for wear or damage (Fig. 39). Replace as necessary.

INSTALLATION

Figure 40:

1. Lubricate with clean oil and install cam follower assemblies in their original position on the hydraulic adjuster and valve stem (Fig. 40).
2. Install the camshafts.
3. Install timing belt, sprockets and covers using procedures.
4. Install cylinder head cover using.