Warning Lamp Circuit Open (Stored)
SYMPTOM LISTWARNING LAMP CIRCUIT OPEN (STORED)
TEST NOTE All symptoms listed above are diagnosed using the same tests. The title for the tests will be AECM & CLUSTER CCD MESSAGE MISMATCH (STORED).
WHEN MONITORED
With the ignition on, the ACM sends a message to the cluster to turn the lamp on because of a detection of a malfunction, or during a lamp check.
SET CONDITION
With voltage and current on, the airbag warning lamp circuit (internal to the cluster), is other than expected.
POSSIBLE CAUSES
- Stored code has become active
- Stored code has Not been reproduced