Output Driver Not Tested (Stored)

SYMPTOM LIST
OUTPUT DRIVER NOT TESTED (STORED)

TEST NOTE All symptoms listed above are diagnosed using the same tests. The title for the tests will be AECM & CLUSTER CCD MESSAGE MISMATCH (STORED).

WHEN MONITORED
Continuously when the ignition is on.

SET CONDITION
This code may set whenever another code is set due to any short to battery or short to ground failure. If all other codes have been repaired and this code appears by itself, the problem will be an internal failure of the airbag control module.

POSSIBLE CAUSES
- Stored code has become active
- Stored code has Not been reproduced