System Specifications
Brake Rotor Specifications| BRAKE ROTOR | Front | Rear |
| BRAKE ROTOR TYPE | Ventilated | Solid |
| ROTOR THICKNESS | 25.87 - 26.13 mm (1.019 - 1.029 in.) | 11.63 - 12.13 mm (0.458 - 0.478 in.) |
| MINIMUM ROTOR THICKNESS Minimum allowable thickness markings are cast/stamped on an un-machined surface of the rotor. This marking includes 0.76 mm (0.030 in.) allowable rotor wear beyond the recommended 0.76 mm (0.030 in.) of rotor refacing. | 24.4 mm (0.961 in.) | 10.4 mm (0.409 in.) |
| ROTOR THICKNESS VARIATION | 0.013 mm (0.0005 in.) | 0.013 mm (0.0005 in.) |
| ROTOR RUNOUT * * TIR - Total Indicator Reading (measured on vehicle) | 0.08 mm (0.003 in.) | 0.08 mm (0.003 in.) |
| ROTOR MICRO-FINISH | 15 - 80 RMS | 15 - 80 RMS |