No EMCC Engagement

SYMPTOM:
NO EMCC ENGAGEMENT

POSSIBLE CAUSES
- BRAKE LIGHT SWITCH MISADJUSTED
- ENGINE COOLANT TEMPERATURE STAYS LOW TOO LONG

Repair Instructions:
BRAKE LIGHT SWITCH MISADJUSTED
Repair/replace Brake Light Switch. (Misadjusted switch could indicate "brake on" when brakes are not on.)
Perform Transaxle 42LE Verification TEST VER-1A Verification Test VER-1A - Transmission Control System
ENGINE COOLANT TEMPERATURE STAYS LOW TOO LONG
Check Coolant System / Thermostat stuck. Also, check for PCM DTC's.
Perform Transaxle 42LE Verification TEST VER-1A Verification Test VER-1A - Transmission Control System