Limp-In Mode - No Codes

SYMPTOM:
LIMP-IN MODE - NO CODES

POSSIBLE CAUSES
- DEFECTIVE RELAY
- INTERMITTENT RELAY CONNECTION
- INTERMITTENT B (+) SPLICE TO RELAY
- INTERMITTENT FUSED IGNITION SWITCH OUTPUT FEED TO TCM

Repair Instructions:
DEFECTIVE RELAY
Refer to Symptoms List, RELAY OUTPUT ALWAYS OFF.
Perform Transaxle 42LE Verification TEST VER-1A Verification Test VER-1A - Transmission Control System
INTERMITTENT RELAY CONNECTION
Refer to Symptoms List, RELAY OUTPUT ALWAYS OFF.
Perform Transaxle 42LE Verification TEST VER-1A Verification Test VER-1A - Transmission Control System
INTERMITTENT B (+) SPLICE TO RELAY
Refer to Symptoms List, RELAY OUTPUT ALWAYS OFF.
Perform Transaxle 42LE Verification TEST VER-1A Verification Test VER-1A - Transmission Control System
INTERMITTENT FUSED IGNITION SWITCH OUTPUT FEED TO TCM
Refer to Symptoms List, RELAY OUTPUT ALWAYS OFF.
Perform Transaxle 42LE Verification TEST VER-1A Verification Test VER-1A - Transmission Control System