Airbag Trouble Codes

The airbag control module may report any of the following diagnostic trouble codes.

For the following codes, replace the airbag control module (ACM) even if set intermittently:
- ACM ACCELEROMETER
- ACM INTERNAL DIAGNOSTIC CODE #2
- ACM FIRING STORED ENERGY CODE
- ACM OUTPUT DRIVER
- ACM INTERNAL DIAGNOSTIC CODE #1

For these codes, refer to the appropriate diagnostic procedure:
- Cluster Message Mismatch
- Driver Squib Circuit Open
- Driver Squib Circuit Shorted
- Driver Squib Circuit Shorted to Battery
- Driver Squib Circuit Shorted to Ground
- Loss of Ignition Run Only
- Loss of Ignition Run/Start
- No Cluster Message
- No Cluster IFR Communication
- No PC Communication
- Passenger Squib Circuit Open
- Passenger Squib Circuit Shorted
- Passenger Squib Circuit Shorted to Battery
- Passenger Squib Circuit Shorted to Ground
- Power Stage Not Tested
- Warning Lamp open/shorted