Replacement

Throttle Body:

WARNING: Release fuel pressure prior to opening fuel system.

REMOVAL
1. Accelerator cable connection
2. Air intake hose
3. Vacuum hose connection
4. Throttle position sensor connector
5. Idle air control motor connector
6. Throttle body
7. Gasket

INSTALLATION
1. Gasket
2. Throttle body
3. Idle air control motor connector
4. Throttle position sensor connector
5. Vacuum hose connection
6. Air intake hose
7. Accelerator cable connection
8. Adjust accelerator cable

CAUTION:
IF
The throttle body or IAC motor has been replaced

OR
The IAC motor related circuit has been opened during engine running or IAC motor operation test

THEN
Use a scan tool to reset the IAC.