Air Cleaner Housing: Service and Repair

Fig. 3 Air Inlet Resonator:

AIR INLET RESONATOR - REMOVAL
1. Remove bolt holding resonator to intake manifold Fig. 3.
2. Loosen clamp holding resonator to air inlet tube. Remove resonator.

INSTALLATION
1. Install air inlet tube to resonator.
2. Tighten clamp to 3± 0.5 Nm (25 ± 5 in. lbs.) torque.
3. Install bolt holding resonator to intake manifold. Tighten to 5 ± 0.5 Nm (45 ± 5 in. lbs.) torque.