Restraint Systems

AIRBAG TROUBLE CODES
The airbag control module may report any of the following diagnostic trouble codes.

For these codes, replace the Airbag Control Module (ACM) even if set intermittently:
- AECM Accelerometer
- AECM Internal Diagnostic 1
- AECM Internal Diagnostic 2
- AECM Output Driver
- AECM Stored Energy

For these codes, refer to the appropriate diagnostic procedure:
- AECM & Cluster CCD Message Mismatch
- Driver Squib Circuit Open
- Driver Squib Circuit Shorted
- Driver Squib Term Shorted to Battery
- Driver Squib Term Shorted to Ground
- Loss of Ignition Run Only
- Loss of Ignition Run/Start
- No CCD Communication
- No Cluster CCD Bus Message
- Passenger Squib Circuit Open
- Passenger Squib Circuit Shorted
- Pass Squib Term Shorted to Battery
- Pass Squib Term Short to Ground
- Warning Lamp Circuit Open
- Warning Lamp Circuit Shorted