CCD Communication

NAME OF CODE
- CCD communications

WHEN MONITORED
Ignition on.

SET CONDITION
This Diagnostic Trouble Code (DTC) is set when the Control Antilock Brake (CAB) cannot transmit the Antilock Brake System (ABS) status message for 10 seconds. If the instrument cluster does not receive the ABS status message, the instrument cluster will provide a ground path and illuminate the ABS warning lamp.

POSSIBLE CAUSES
- CCD bus failure
- Other modules linked to the CCD bus

NS BODY WITHOUT TRACTION CONTROL

NAME OF CODE
- CCD communications

WHEN MONITORED:
Ignition on.

SET CONDITION
This Diagnostic Trouble Code (DTC) is set when the Control Antilock Brake (CAB) cannot transmit the Antilock Brake System (ABS) status message for 10 seconds. If the BCM does not receive the ABS status message, the BCM will provide a ground path and illuminate the ABS warning lamp.

POSSIBLE CAUSES:
- CCD bus failure
- Other modules linked to the CCD bus


NS BODY WITH TRACTION CONTROL

NAME OF CODE
- CCD communications

WHEN MONITORED
Ignition on.

SET CONDITION
This Diagnostic Trouble Code (DTC) is set when the Control Antilock Brake (CAB) cannot transmit the traction control/ABS status message for 10 seconds. If the BCM does not receive the traction control/ABS status message, the BCM will provide a ground path and illuminate the ABS warning lamp.

POSSIBLE CAUSES:
- CCD bus failure
- Other modules linked to the CCD bus