Recall - Reprogram PCM: Overview
February 1999California Emissions Recall No. 803
Reprogram Powertrain Control Module
Models
1998 (JA) Dodge Stratus and Plymouth Breeze
1998 (JX) Chrysler Sebring Convertible
Note:
This recall applies to vehicles equipped with a 2.4L engine ("X" in the 8th VIN position) and a California emissions control system (sales code NAE) built through October 16, 1997 (MDH 1016XX).
Subject
The On-Board Diagnostic (OBD) system on about 3,900 of the above vehicles does not operate the evaporative emissions purge system monitor. California Air Resources Board (CARB) regulations require a purge system monitor as part of the OBD system.
Repair
To repair this condition, the Powertrain Control Module (PCM) must be reprogrammed (flashed).
Parts Information
Each dealer, to whom vehicles in the recall were invoiced (or the current dealer at the same street address) will receive enough Authorized Software Update labels and Authorized Modifications labels to service about 25% of those vehicles. Additional labels may be ordered as needed.
Each vehicle requires application of the following labels:
Part Number Description
04669020 Authorized Software Update Label
04275086 Authorized Modifications Label
Completion Reporting and Reimbursement
Claims for vehicles that have been serviced must be submitted on the DIAL System. Claims submitted will be used by DaimlerChrysler to record recall service completions and provide dealer payments.
Use one of the following labor operation numbers and time allowances:
Labor Operation Time
Number Allowance
PCM Update Previously Performed 08803181 0.2 hours
Reprogram Powertrain Control Module 08803182 0.5 hours
Add the cost of the labels plus applicable dealer allowance to your claim.
Note:
See the Warranty Administration Manual, Recall Claim Processing Section for complete recall claim processing instructions.
Parts Return
Not Applicable
Dealer Notification & Vehicle List
All dealers will receive a copy of this dealer recall notification letter by first class mail. Each dealer to whom involved vehicles were invoiced (or the current dealer at the same street address) will receive a list of their involved vehicles. The vehicle list is arranged in Vehicle Identification Number (VIN) sequence. Owners known to DaimlerChrysler are also listed. The lists are for dealer reference in arranging for service of involved vehicles.
DIAL System Functions 53 and VIP
All involved vehicles will be entered to DIAL System Functions 53 and VIP at the time of recall implementation for dealer inquiry as needed.
Function 53 provides involved dealers with an updated VIN list of their incomplete vehicles. The customer name, address and phone number is listed if known. Completed vehicles are removed from Function 53 within several days of repair claim submission. To use this system, type "53" at the "ENTER FUNCTION" prompt, then type "0RD803".
Owner Notification and Service Scheduling
All involved vehicle owners known to DaimlerChrysler are being notified of the service requirement by first class mail. They are requested to schedule appointments for this service with their dealers. A copy of the owner notification letter is included.
Enclosed with each owner notification is an Owner Notification Form. The involved vehicle and recall are identified on the form for owner or dealer reference as needed.
Vehicle Not Available
If a vehicle is not available for service for a known reason, let us know by filling out the pre-addressed Vehicle Disposition Form portion of the Owner Notification Form or describe the reason on a postcard and mail to:
DaimlerChrysler Corporation
CIMS 482-00-85
800 Chrysler Drive East
Auburn Hills, Michigan 48326-2757
Additional Information
If you have any questions or need assistance in completing this action, please contact your Zone Service Office.