Oil Pan: Specifications
Oil PanBolts 12 Nm (105 inch lbs.)
Drain Plug 27 Nm (20 ft. lbs.)
Oil Pan Collar
Collar to Pan/Transaxle Bolts
Step 1. Place collar into position between transaxle and oil pan. Install collar to transaxle bolt 1, hand start only.
Step 2. Install collar to oil pan bolt 4, hand tight only.
Step 3. Position bending strut in place and hand start only bolt 3 into upper axle.
Step 4. Install bolt 2, through strut and collar, hand start only.
Step 5. Install bolt 6, strut to cylinder block, hand tighten only.
Step 6. Install the remaining collar to oil pan bolt 5, hand tight only.
Step 7. Final torque collar to transaxle bolts 1- 3, to 101 Nm (75 ft. lbs.)
Step 8. Install bolts 7 and 8 through strut and into cylinder block.
Step 9. Final torque bolts 4 - 8 to 61 Nm (45 ft. lbs.)