Left Mount

NOTE: If centering or adjusting the engine/transmission assembly is needed refer to Adjustments.
The left side engine mount is a Hydro-Mount and may show surface cracks. This will not effect it's performance and should not be replaced. Only replace the Hydro-Mount when it's leaking fluid.

REMOVAL

Left Side Mount-Typical:

1. Support the transmission with a transmission jack.
2. Remove the three vertical bolts a from the mount to the transmission bracket.
3. Remove the mount to frame rail fasteners and remove mount.

INSTALLATION
1. Install mount. Tighten mount to frame rail fasteners b to 33 Nm (24 ft. lbs.).
2. Install mount to transmission bracket vertical bolts (A). Tighten to 61 Nm (45 ft. lbs.).