General Information

The rear shock absorber can not be repaired and must be replaced as a unit if found to be defective in any way. The shock absorber is available in 2 different suspension calibrations, be sure the shock absorber is replaced with a shock absorber of the same calibration. Refer to the sales codes for the vehicle being serviced, to determine which type of suspension the vehicle is equipped with.
The components of the shock absorber assembly listed below are replaceable if found to be defective.
- Coil Spring (Coil springs come in a standard and high rate. Be sure spring is replaced with a spring of the correct rate.)
- Dust Shield Assembly
- Mount Bracket
- Jounce Bumper
- Lower Spring Isolator
- Shaft Nut
- Lower Retainer (Washer)
- Upper Retainer (Washer)
- Bushing Sleeve
- Upper Mount Bushing
- Lower Mount Bushing
- Upper Spring Isolator