Transmission Shift Position Indicator Lamp: Service and Repair

The lighted PRNDL letter bezel has no serviceable bulb. If the lamp does not function properly, the lighted PRNDL letter bezel assembly must be replaced.

REMOVAL
1. Remove floor console.
2. Disengage wire harness connector on bottom side of floor console.
3. Disengage inverter for lighted PRNDL letter bezel from shifter cover.
4. Pull bezel downward through access hole in floor console.
5. Separate lighted PRNDL letter bezel from vehicle.

INSTALLATION
1. Position lighted PRNDL letter bezel to vehicle.
2. Push bezel upward through access hole in floor console.
3. Engage inverter for lighted PRNDL letter bezel to shifter cover.
4. Engage wire harness connector on bottom-side of floor console.
5. Install floor console.