Floor PRNDL Lamp

REMOVAL
1. Remove gear shift knob.
2. Using a plastic trim stick, Special Tool C-4755, disengage the forward or rear edge of PRNDL bezel from floor console.
3. Pull upward carefully on PRNDL bezel and disengage tabs from rear floor console bezel.
4. Disengage wire connector to lamp assembly.
5. Separate PRNDL bezel and lamp assembly from vehicle.

INSTALLATION
1. Position PRNDL and lamp assembly to vehicle.
2. Engage wire connector to lamp assembly.
3. Engage tabs on PRNDL bezel to slots in rear floor console bezel.
4. Push downward on PRNDL bezel to engage to bezel to floor console.