Wiper Arm: Service and Repair
Adjust the wiper and blade assembly so that the clearances between the wiper blade edges and the ceramic line are at the standard value.
Standard value
(A): 47 ± 5 mm (1.85 ± 0.20 in.)
(B): 10 ± 5 mm (0.39 ± 0.20 in.)
Adjust the wiper and blade assembly so that the clearances between the wiper blade edges and the ceramic line are at the standard value.
Standard value
(A): 47 ± 5 mm (1.85 ± 0.20 in.)
(B): 10 ± 5 mm (0.39 ± 0.20 in.)