Air Inlet Resonator

Fig. 2 Air Inlet Resonator Attached To Throttle Body:

AIR INLET RESONATOR - REMOVAL
1. Remove 2 bolts holding air inlet resonator to intake manifold Fig. 1.
3. Loosen screw holding resonator to throttle body Fig. 2.
3. Loosen clamp holding resonator to air inlet tube. Remove resonator.

INSTALLATION
1. Install air inlet resonator to throttle body.
2. Install air inlet tube to resonator.
3. Tighten clamps to 3 ± 0.5 Nm (25 ± 5 in. lbs.) torque.