1, 2 and 3 Digit Codes: 36

NOTE: The existence of code 36 indicates a mechanical or hydraulic (non-electrical) related problem. When this code exists, diagnosis should be based on the associated speed error code and ONLY mechanical causes should be considered.

WHEN MONITORED:
After a Speed Error code is stored.

SET CONDITIONS:
1) Fault code 50-58 (Speed Error) has already been set.

2) Fault happened within 1.3 seconds of a shift.

FAULT SET TIME:
Same as associated speed error.

EFFECT:
Same as associated speed error.

THEORY OF OPERATION:
This code is not stored alone. It is stored if a speed error (codes 50 through 58) is detected immediately after shift.

The existence of code 36 indicates a mechanical or hydraulic (non-electrical) related problem. It should be noted, however, that all mechanical problems don't necessarily result in code 36.

PROBABLE CAUSES:
Internal transmission problem (refer to Speed Errors, codes 50 through 58).