Fuel Filler Hose: Service and Repair

FUEL FILLER NECK

REMOVAL
1. Disconnect negative cable from battery.
2. Drain fuel tank.
3. Remove 3 screws from filler neck to quarter panel.
4. Raise and support vehicle on host.
5. Loosen clamps at filler neck and vent tube
6. Remove filler neck.

INSTALLATION
1. Install filler neck to filler hose and vent hose.
2. Tighten clamps.
3. Lower vehicle.
4. Install 3 screws to filler neck and quarter panel.
5. Fill tank and check for leaks.
6. Connect negative cable from battery

FUEL FILLER VENT HOSE

REMOVAL
1. Perform fuel system pressure release.
2. Disconnect negative cable from battery.
3. Drain fuel tank.
4. Raise and support vehicle on host.
5. Lower fuel tank.
6. Remove vent hose from top of tank.
7. Remove vent hose from fuel filter neck.

INSTALLATION
1. Install vent hose and tighten clamp.
2. Install fuel tank.
3. Install vent hose to fuel filler neck and tighten clamp.
4. Lower vehicle.
5. Fill fuel tank and check for leaks.
6. Connect negative cable to battery.