Child Seat

Child Seat Module:

CHILD SEAT MODULE REMOVAL
1. Remove rear seat back from vehicle.
2. Slide lower bolster cushion retainer from channel on child seat cushion.
3. Separate lower bolster from seat child seat.
4. Remove liner from child seat module.
5. Disengage push-in fasteners holding upper bolster to child seat module above shoulder belts.
6. Remove screws holding top of child seat module to seat back frame from behind shoulder belts.
7. Remove screws holding bottom of child seat module to seat back frame.
8. Separate child seat module from seat back.

INSTALLATION
1. Place child seat module in position on seat back.
2. Install screws to hold bottom of child seat module to seat back frame.

CAUTION: Do not capture seat belt webbing between module and seat back frame when installing upper screws.

3. Install screws to hold top of child seat module to seat back frame from behind shoulder belts.
4. Engage push-in fasteners to hold upper bolster to child seat module above shoulder belts.
5. Install liner in child seat module.
6. Place lower bolster in position on seat child seat.
7. Slide lower bolster cushion retainer into channel on child seat cushion.
8. Install rear seat back in vehicle.