Sunroof / Moonroof Cable: Service and Repair

REMOVAL

NOTE: Always replace drive cables as a set.

1. Remove left and right sunroof mechanisms, Steps 1 through 21. Refer to Sunroof Track/Service and Repair.
2. Remove sunroof drive motor.
3. Pull cables forward from tracks.
4. Separate cables from vehicle.

INSTALLATION

NOTE: Lubricate cables with Mopar Lubriplate white grease or equivalent.

1. Push cables rearward into tracks.
2. Install sunroof mechanisms, Steps 3 through 2
3. Synchronize cables, see Sunroof Cable Synchronization procedure in Sunroof Cable/Adjustments.