Power Steering Line/Hose: Service and Repair

The content of this article reflects changes called for in TSB 26-08-96.





Pre-Removal Operation

1. Drain power steering fluid.
2. Remove front bumper.
3. Remove washer tank.

Post-Installation Operation

1. Install front bumper.
2. Install washer tank.
3. Fill power steering reservoir.
4. Bleed power steering system. Service and Repair

Installation Service Point

Pressure Hose Installation






When the pressure hose is installed, align the white line on the pressure hose with the white line on the pressure tube so that together they form a straight line.