Quarter Window

Quarter Power Window Components:

REMOVAL
1. Remove quarter trim panel as necessary to gain access to quarter window.
2. Raise quarter window approximately 100 mm (4 in.) from the down position.
3. Remove bolt holding glass stabilizer bumper to top of quarter panel opening.
4. Disconnect power window motor wire connector.
5. Remove bolts holding quarter window assembly to quarter panel and lift the assembly through the opening at the top of the quarter panel.

INSTALLATION
Reverse the preceding operation. Align the quarter glass to have adequate pressure on the weatherstrips for proper sealing. Insert sling well drain tubes into the holes in the floor pan.