Center Side Rail End Seal Removal

Roof Rail And Header Weatherstrips:

REMOVAL
1. Release latches holding roof header to windshield header.
2. Lower folding top.
3. Peel water seal away from forward end of center side rail.

INSTALLATION
1. Clean adhesive residue from end of center side rail.
2. Apply contact adhesive to back of seal and end of center side rail.
3. Allow adhesive to air dry tack free.
4. Place seal in position on end of rail.
5. Press seal in place to assure adhesion.
6. Close top and water test vehicle. Reverse the preceding operation.