How to Read Fault Messages With the DRBII

HOW TO READ FAULT MESSAGES WITH THE DRBII

To read fault messages:
When the module menu screen is displayed, select 2) READ FAULTS.

- If there are no fault messages, the display will read as follows:

XXXXXXX FAULTS
NO FAULTS DETECTED

NOTE: XXXXXXX will be the name of the module.

- If there are fault messages, the display will read as follows:

1 OF 3 FAULTS
[fault code & message appear here]

NOTE: The exact numbers displayed will vary depending on how many faults there are.