How to Use the DRBII Menu

HOW TO USE THE DRBII MENU

The DRBII screen reads as follows:

DRBII
1) VEHICLES TESTED
2) HOW TO USE
3) CONFIGURE
4) SELECT SYSTEM

VEHICLES TESTED - The display will read:

VEHICLES SUPPORTED:
1991 CHRYSLER
PLYMOUTH/DODGE
JEEP & EAGLE

HOW TO USE - series of screens will be displayed about how to use the DRBII keys to move through the diagnostic program.

CONFIGURE - provides a menu of four DRBII functions, and enables you to view or change these functions. The functions are:
- US/METRIC: enables you to have sensor, input, output, and other values displayed either In US standard units or in metric units.
- KEY CLICK: enables you to choose to have either the green light illuminate or the beeper sound whenever a DRBII key is pressed.
- KEY REPEAT: If key repeat is ON, the down arrow or up arrow key will scroll the display repeatedly; if key repeat is OFF, the down arrow or up arrow key will scroll the display only one item at a time.
- REMOTE DISPLAY: enables you to have what appears on the DRBII screen also displayed on another terminal screen.

When you select CONFIGURE, the display will read:

CONFIGURE
1) VIEW
2) CHANGE

VIEW: enables you to view the CONFIGURE menu. If selected, the display will read:

CONFIGURE
1) US/METRIC
2) KEY CLICK

Press the down arrow twice to view the rest of the menu. The display will change to read as follows:

CONFIGURE
2) KEY CLICK
3) KEY REPEAT
4) REMOTE DISPLAY

CHANGE: enables you to change the setting of any of the four DRBII functions under the CONFIGURE menu. If selected, the display will read:

CONFIGURE
1) US/METRIC
2) KEY CLICK
3) KEY REPEAT

Press the down arrow twice to view the rest of the menu. The display will change to read as follows:

CONFIGURE
2) KEY CLICK
3) KEY REPEAT
4) REMOTE DISPLAY

Press the number of the function you want to change, or move the arrows to the item and press ENTER. The display for each choice will read as follows;

US/METRIC
1) US
2) METRIC

KEY CLICK
1) BEEPER
2) GREEN LED

KEY REPEAT
1) ON
2) OFF

REMOTE DISPLAY
1) ON
2) OFF

Press the number of the desired setting, or move the arrows to the desired settings and press ENTER.