Help 7, Road Test

The conditions listed below need to be met first, for a successful road test.

1. Transaxle fluid must be filled to the proper level.

2. Transaxle must be at normal operating temperature.

3. Use the DRBII to read fault codes. Record the fault codes and then erase them. See HELP 1.

4. Use the DRBII to monitor RPM. See HELP 1 for assistance.

5. Put the shift lever in overdrive with the transaxle in 3rd gear. Maintain a throttle position of 15 degrees to upshift to 4th gear. Repeat several times to see if CODE 46 reoccurs.