| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Resurface/Grind |
| With A/C |
| All Valves | 10.4 | 0.0 | A | Includes: R&R Cylinder Heads, Clean Carbon And Make All Necessary Adjustments. |
| Without A/C |
| All Valves | 10.2 | 0.0 | A | Includes: R&R Cylinder Heads, Clean Carbon And Make All Necessary Adjustments. |
| Add the Following Operations If Performed With Valves, Grind |
| Valve Guide, Knurl |
| Each | 0.1 | 0.0 | A | |
| Valve Guide, Renew |
| Each | 0.2 | 0.0 | A | |
| Note |
| To Ream Guide, Add | 0.1 | 0.0 | A | |
| Timing Belt, Renew | 0.7 | 0.0 | A | |
| Rocker Arms, Renew |
| Front Bank | 0.5 | 0.0 | A | |
| Rear Bank | 0.5 | 0.0 | A | |
| Both Banks | 0.9 | 0.0 | A | |
| Camshaft, Renew |
| Front | 1.1 | 0.0 | A | |
| Rear | 1.1 | 0.0 | A | |
| Lifters, Renew |
| Front Bank | 0.3 | 0.0 | A | |
| Rear Bank | 0.6 | 0.0 | A | |
| Both Banks | 0.8 | 0.0 | A | |
| Tune-Up | 0.6 | 0.0 | A | |
| Note |
| With AC, Add | 0.4 | 0.2 | A | |
| To Replace Camshaft, Add | 0.2 | 0.1 | A | |